GRP Risers

Riser voids – the aperture left to accommodate M&E services on multiple floors of a building – are a major health and safety issue on any construction site.

The proven gritted anti-slip surface of our moulded grating has one of the highest degrees of slip resistance ever measured for a walking surface, especially in wet, oily or frosty work areas. The integral gritted anti-slip top surface provides long-lasting slip resistant qualities. The material has excellent corrosion resistance, a factor which makes it a logical and cost-effective alternative to conventional steel materials.

 

FAQs

What exactly is a GRP riser?

A riser void is the term given to a hole purposely left in the floor during the construction or refurbishment of multistorey buildings. They are put there to allow essential services – such as electrics – to be added at a later stage.

Whilst the voids serve an important function, they do pose a significant safety risk. Which is where GRP risers come in.

Specially designed to safely fill the gap, they dramatically reduce the risk of falls. And if manufactured in GRP, they are lightweight and easy to remove when required.

 

What are the benefits of a GRP riser?

The safety advantages of a riser speak for themselves, but why opt for a void grating made from glass reinforced plastic over any other material?

That’s easy. A riser made from GRP is not only lightweight and easy to manoeuvre on site, but it is also highly durable, extremely strong, and both non-corrosive and non-conductive – all important characteristics for onsite safety.

Keen to know more about the advantages of GRP risers or ready to put an order in? Get in touch with a member of the team who will be more than happy to assist. Call us on 01695 557 711 or email sales@hrkilns.com.

 

Where can GRP risers be used?

Riser voids are predominantly used on construction sites to provide access between floors for mechanics and services.

We offer risers manufactured from high quality glass reinforced plastic. This makes them extremely lightweight and easy to handle in comparison to more traditional materials such as steel. It also means they benefit from an inbuilt anti-slip surface – making them great for use on construction sites and anywhere a void needs safely covering.

To find out more about whether a riser would be suitable for your needs talk to the team on 01695 557 711.

Category:
Enquire Now Contact Us

Key Features of Riser Grating

Non slip quartz gritted surface
Superior corrosion resistance
Impact resistance
Non sparking
Maintenance free
UV resistant
Lightweight
Low installation costs
Low design limitations
Life cycle cost savings
Non conductive
Exceptional mechanical strength
Easily fabricated

Request a Call

Request a call from one of our GRP specialists to discuss your bespoke GRP needs.

    Latest News

    Check out the latest news and projects that we here at HR Kilns and HR Fibreglass are a part of.

    According to the Health and Safety Executive, slips and trips ... Read more

    Yes. That was easy. Or was it…? In reality whilst ... Read more

    Be honest, when was the last time you examined your ... Read more

    Call Now Button